Capacitance	Yes
RPM	EEDMRPMG (opt.)
Low Pass Filter (LPF)	No
Case or Zipper Pouch	EEDM650CPB
Adjustable Trigger Level	No
Temperature	EEDMTEMP-1
AC Volts	1,000
Basic DC Accuracy, %	0.05
Micro Amps	Yes
Country Of Origin	KOR
Dimensions, inches	3-13/16 x 8 x 2-13/32
Noise Reduction Circuit	No
mS Pulse Width	Yes
CAT Rating	CATIII 1,000 V CAT IV 600 V
Backlight	Yes
Auto Shut-off	Yes
Test Leads	EEDM504B3
Certificate of Calibration Model	EEDM604ECRT
DC Amps	10
UL® Listed	cULus 61010-1
Glitch Capture	Yes
Insulation Test	No
Analog Bar Graph	Yes
Resistance, ohms	(plus conductance)
Data Hold	Yes
Auto Range	Yes
Duty/Dwell	Yes/Duty
True RMS (Root Mean Square)	Yes
AC Amps	10
Display Count	50,000
Fuses	EEDMFUSE-7, EEDMFUSE-8
Blown Fuse Identifier	Yes
Comp. Output (USB)	No
Min/Max	Yes
DC Volts	1,000
Easy Open Battery and Fuse Door	EEDM650C-6
Color Screen	Yes
Frequency	Yes

Features

• Color VA Type LCD Display - 50,000 count with 51 segment bar graph
• Triple Display - activated with REC, REL, PEAK-H buttons
• REC (Record Mode): store minimum, maximum and average readings over a measurement period
• RANGE: manual range option for each function
• PEAK-H: peak hold button engages .25 millisecond rapid signal capture function to catch glitches
• COMP (Compare): activates the compare function to compare your reading against a known standard
• REL% (Relative Percent Mode): factor out lead resistance for improved low ohm measurements or compare readings to a known standard—can also be used for differential measurements
• EDIT: use in conjunction with the COMP and arrow buttons to set the standard value for comparing readings
• Gray button: use to select gray functions noted on meter
• HOLD: lock the reading on the display for hard to read locations for future reference
• Ohms, Conductance, Continuity: toggle between measuring resistance, conductance and continuity buzzer
• ACmV/ DCmV(AC or DC millivolts): measure up to 500 AC or DC millivolts
• ADP (Adaptor mode) - direct readout on the LCD when using optional accessories
• DCV (DC Volts) - measure up to 1,000 V
• ACV/Hz (AC Volts and Frequency) - measure up to 1,000 V AC - Push the grey button to view frequency, duty, and mS pulse width of the signal
• Diode Test - test for good, open, or shorted diodes in circuits
• CAP (Capacitance) - measure the capacitance of condensers and capacitors
• Hz (Frequency) - measure the frequency, duty and pulse width of sensors and signals. Also used to measure temperature (gray button)
• AC/DC Current Functions (Amps) - measure the parasitic draw from the battery with ignition off
• External Testing of Internal Fuses - you can determine the status of the internal fuses before you open the battery/fuse compartment
• Protective boot and built-in tilt stand
• Technical Support 888-382-6522